Luton Vans Standard and Low Floor/Loloader "Call the Vantrader" 07792 904943 sales@vantrader.orgHeader

Fiat Ducato 2.3 130bhp Standard Luton 4.1m Loadlength £21500+VAT+£280


Fiat Ducato 35 2.3ltr 130 Luton Van Driving and Performance Fiat pulled a smart move by keeping its 2.3-litre Multijet II diesel engine out of the Citroen Relay and Peugeot Boxer as this impressive unit provides a valuable unique selling-point for the Ducato. The 130bhp power option that most buyers will choose develops maximum torque of 320Nm and is a smooth, unflustered companion on the road. Even at the top of the rev range the engine’s deep hum never sounds harsh and noise levels are considerably lower than those from the equivalent 2.2-litre engine fitted to the Boxer and Relay.

4100mm Long
2180mm Wide
2180mm Internal Height
Galvanised runners and bearers.
Bearers spaced at 16” centres.
11mm GRP sides
11mm GRP bulkhead
GRP Luton pod with 12mm ply floor
Aluminium cant rails, raves and corner pillars
12mm Phenol coated floor sheets
GRP roof sheet bonded to roof sticks
Galvanised rear frame Rear roller shutter mill finish 2 rows tie rail each side

Cost of above body: £21,500.00 + VAT + 1st Registration & RFL

Del 500Kg column tail lift 815mm platform: £1,725.00 + VAT (fitted)
Finance Option:
Deposit of £2,000.00 + vat
36 x £452.51 + vat followed by balloon of £9,307.50 + vat
48 x £395.10 +vat followed by balloon of £7,586.25+ vat
Based on 10kpa

We also have National Small Series Type Approval on our Vans issued by the VCA.

Fiat Ducato 2.3 130 Standard Luton 4.1m


eBay on my website by Auction Nudge


| | | | ©2015 Vantrader UK